Pipe Repair & Repiping Services in Minneapolis, MN
Low pressure, rusty water, or a leak you can't locate? We'll diagnose the problem, give you a clear quote, and fix it right the first time. No hard sell. No surprises.
- Thorough Diagnostic and Flat Rate Pricing
- PEX-A Repiping Built for MN Winters
- Pressure-Tested Before We Patch Anything
We respond quickly — usually the same day.
"*" indicates required fields
Signs Your Minneapolis Home's Pipes Are Telling You Something
Most Twin Cities homes built between the 1940s and the 1980s were plumbed with galvanized steel supply lines. Those pipes don’t fail suddenly. They corrode from the inside out, year by year, narrowing the interior, contaminating your water with iron, and quietly killing pressure, until one day the signs become impossible to ignore. If any of the following sound familiar, your pipes are overdue for a closer look.
- Water runs brown or orange, especially first thing in the morning
- You're dealing with another pinhole leak or drip at a joint
- Visible rust, corrosion, or greenish buildup on exposed pipe sections
- Pressure has dropped noticeably throughout the whole house
- Pipes knock, creak, or gurgle when you run the water
- Drywall staining with no obvious water source nearby
What Our Pipe Repair & Repiping Service Includes
Whether you’re tracking down a single pinhole leak or ready to replace every supply line in the house, Twin Cities Premier Plumbing handles the full range of pipe work for Minneapolis homeowners. If you have a leak that caused significant water damage we are experts when it comes to insurance claims and we’ll be happy to help you navigate the claim process.
Leak Detection & Targeted Pipe Repair
We use moisture meters and thermal imaging cameras to trace hidden leaks to their exact source before we open anything. Targeted repairs cover pinhole leaks in aging copper, burst pipe repair after a Minnesota freeze event, main supply line replacement from the street, and partial repiping for additions or remodels.
Full & Partial Whole-Home Repiping
A full repipe starts at the main shutoff. We drain the entire system, pull old galvanized or failing copper lines, and run new PEX-A tubing from a central manifold through wall cavities to every fixture. PEX-A expands before it bursts — the right call for Minneapolis homes.
- Moisture meter and thermal imaging leak trace before opening walls
- Full system drain and old pipe removal
- PEX-A supply line installation from manifold to every fixture
- 1/4-turn brass ball valve shutoff at every termination point
- Pressure-reducing valve (where city pressure exceeds 80 PSI)
- Expansion tank on water heater cold supply (closed systems)
- Full-system pressure test at 80-100 PSI, 30-60 minutes before patching
- Access plan and drywall patching coordination confirmed before work begins
Every job comes with a written scope and a firm price confirmed before a single wall is opened. Ask us about WiseTack financing for larger repipe projects.
Our Pipe Repair & Repiping Work in Minneapolis
Why Minneapolis Homeowners Trust Twin Cities Premier Plumbing for Repiping
We Find Leaks Before We Open Anything
Moisture meters and thermal imaging cameras trace hidden leaks to the exact source first. You're not paying to open walls on a hunch.
Every Repipe Is Pressure-Tested Before Patching
New supply lines are held at 80-100 PSI for 30-60 minutes before we close anything. Problems get fixed on the spot.
PEX-A: the Right Material for Minnesota
Engineered to expand before it bursts in freeze-thaw conditions. Not a cost-cutting choice. The right choice for how Minneapolis winters work.
Flat-Rate Quote, Confirmed Before We Start
Price, scope, and access plan in writing before a single tool touches your home. No hourly billing. No surprises on the final invoice.
How Our Minneapolis Repiping Process Works
On Site Visit
Water Shutoff & System Drain
Old Pipe Removal & New Line Install
Pressure Test
Reconnection & Walkthrough
How Much Does Repiping Cost in Minneapolis?
Repiping cost in the Minneapolis area depends on several variables: the square footage of the home, the number of fixtures, how many stories need service, the accessibility of your wall cavities, and whether the job is a targeted repair or a full whole-home repipe.
Rather than quoting a number that doesn’t apply to your home, we provide a detailed estimate based on your specific situation. You’ll have a written price before any work begins, including labor, materials (PEX-A tubing, brass valves, any pressure-reducing valve or expansion tank needed), and a clear list of access points. No hourly billing. No scope creep without your approval.
If the cost of a full repipe is a concern, we work with WiseTack financing to offer low monthly payment options.
You May Also Need
Sinks & Faucets
Emergency Plumbing
General Plumbing Service Work
We Provide Pipe Repair & Repiping Across the Minneapolis Metro
Serving Minneapolis and surrounding communities with licensed pipe repair and repiping services:
Pipe Repair & Repiping FAQ
How do I know if my Minneapolis home needs repiping?
The most common signs are discolored water (especially brown or orange when you first turn on the hot side), noticeably lower pressure at multiple fixtures, recurring pinhole leaks or joint failures, metallic taste in your tap water, and unexplained moisture staining on walls or ceilings. Homes in Minneapolis and the surrounding suburbs built before 1985 with original galvanized steel supply lines are strong candidates for a repiping evaluation.
How long does a whole-home repipe take?
For most Minneapolis-area homes, a full repipe takes between two and five days depending on the square footage, number of bathrooms, and how accessible the wall cavities are. The onsite visit process lets us give you a more accurate timeline for your specific home before we schedule anything.
Can I stay in my home during the repiping process?
In most cases, yes. Water is typically shut off during working hours and restored each evening so the household can function normally. We’ll confirm the daily schedule during your estimate so you know exactly what to expect.
Why do you use PEX-A instead of copper for repiping?
PEX-A is specifically engineered to expand before it bursts, which makes it the right material for Minneapolis homes where supply lines in exterior walls can see significant temperature swings. It’s also more flexible than copper, meaning fewer fittings, fewer potential leak points, and less wall demolition needed during installation.
Do you need to patch the drywall after repiping?
Yes, strategic access points in walls and ceilings are required to remove old supply lines and run new ones. We coordinate the access plan with you before work begins so you know which areas will be opened. Drywall patching and finish work is typically handled as a separate scope and will be covered clearly in your written estimate.
Does repiping require a permit in Minneapolis?
Yes, a permit is typically required for whole-home repiping work in Minneapolis and surrounding municipalities. Twin Cities Premier Plumbing handles the permit coordination as part of the project. We’ll confirm the requirements for your specific city during the estimate process.
Do you offer same-day or emergency service for burst pipe repairs?
Yes. Burst pipes and active supply line failures are handled as emergency calls. Contact us at (763) 343-9806 for immediate dispatch. Emergency availability applies to urgent pipe failures, not scheduled whole-home repipe projects.
Let's Sort Out Your Pipes for Good
Schedule your service call today to get the process started and we’ll talk through your options with zero pressure.