Expert Sink Repair in Minneapolis, MN
Dripping faucet, slow drain, or a leak soaking your cabinet floor? We find the exact problem and fix it right, usually the same day.
- Same-Day Sink Repair Available
- Upfront Flat-Rate Pricing
- Warranty on Parts and Labor
We respond quickly, usually same day.
"*" indicates required fields
Why That Dripping Faucet or Leaky Sink Needs Attention Now
A slow drain or a faucet that won’t stop dripping might feel like a minor irritation, but left alone, these problems get more expensive. A single dripping faucet can waste thousands of gallons of water per year, and that moisture under the sink quietly warps cabinet floors and creates the right conditions for mold before you ever notice. Shutoff valves that no longer fully close become emergencies when you need them most. Most sink problems are quick fixes when caught early; they become bigger jobs when ignored.
- Faucet dripping or won't shut off completely
- Drain backing up or draining slowly
- Moisture, puddles, or odors in the sink cabinet
- Shutoff valve that won't close all the way
- Pop-up drain that sticks open or won't hold water
- Water staining on the cabinet floor under the sink
What Our Sink Repair Service Includes
Faucet Repair
Most faucet problems come down to a specific worn component, not the faucet body itself. Our tech identifies exactly what’s failing and replaces that component: a worn cartridge, failed O-rings, a cracked valve seat, or a deteriorated ceramic disc. We stock brand-specific cartridges on every truck, including the Moen 1225, Delta RP46074, and Kohler GP77759. When the faucet body is cracked or corroded and replacement is genuinely the better call, we handle the complete swap: old faucet removed, deck cleaned, new faucet set, and supply lines connected using a basin wrench.
Drain Repair
A slow or clogged drain gets addressed at the actual source. For clogs past the P-trap, we use a hand auger to clear the line. If the P-trap itself has failed, we replace the full assembly: 1-1/4 inch for bathroom sinks, 1-1/2 inch for kitchen. A corroded pop-up drain pivot rod gets replaced as a complete assembly. A failed kitchen basket strainer seal gets reseated or replaced using a spud wrench.
Under-Sink Plumbing
Braided stainless supply lines past their 10 to 12 year lifespan, old gate-style shutoff valves that no longer fully close, and corroded slip joint connections all fall within our standard sink repair scope for Minneapolis homes. We replace worn supply lines and upgrade outdated gate valves to modern quarter-turn ball valves while already under the sink.
Every repair ends with a full pressure test and drain flow verification. Before we leave, we walk you through exactly what was done and flag anything else spotted under the sink, with no pressure to act on it that day.
Our Sink Repair Work in Minneapolis
Why Minneapolis Homeowners Choose Twin Cities Premier Plumbing for Sink Repair
We Repair Before We Replace
We diagnose the specific failing component first. If a cartridge swap or a new P-trap handles the problem, that is what you get. We will not push a full fixture replacement when it is not needed.
Parts Pre-Staged Before We Arrive
During our onsite visit we determine everything that needs to be repaired and go over options with you to determine what makes the most sense for you.
Upfront Flat-Rate Pricing
We quote the full price before any work starts. No hourly clock ticking while we work, no surprise line items, and no separate charge for the parts run we already avoided.
Honest Walkthrough, No Pressure
Every repair ends with a plain-English summary of what was done and a straight heads-up about anything else we noticed under the sink. Nothing is added to your ticket without your say-so.
How Our Sink Repair Process Works
Book Your Service Call
Diagnosis on Arrival
Repair or Honest Recommendation
Pressure Test and Flow Check
Walkthrough and Honest Assessment
How Much Does Sink Repair Cost in Minneapolis?
Sink repair pricing depends on what’s actually wrong. A cartridge swap on a standard bathroom faucet is a quick, affordable repair. A full faucet replacement with basin wrench work in a tight space takes more time and materials. Replacing corroded shutoff valves, a failed P-trap assembly, or a basket strainer seal all factor into the final cost, along with the faucet brand and the condition of the existing connections.
We do not charge by the hour. Every job gets a flat-rate price before any work starts, so you know exactly what you are paying before we pick up a tool. No hidden fees, no surprises at invoice time.
Need a little help covering the cost? We offer financing through WiseTack so a plumbing repair does not have to wait on your budget.
Related Plumbing Services
Piping and Repiping
Emergency Plumbing
General Plumbing Service Work
We Provide Sink Repair Across Minneapolis and the West Metro
We handle sink repair in Minneapolis, St. Louis Park, Plymouth, Maple Grove, New Hope, Golden Valley, and the surrounding Twin Cities communities.
Sink Repair FAQ
How long does sink repair take?
Most sink repairs are completed in one to two hours. A straightforward cartridge replacement typically runs under an hour. A full faucet swap, a P-trap replacement, or a shutoff valve upgrade may take closer to two hours depending on access and the condition of the existing connections. We rarely need a second visit because the right parts are confirmed and staged before we arrive.
How much does sink repair cost in Minneapolis?
Pricing depends on what’s failing: the specific component, the faucet brand, and what’s involved in accessing and replacing it. We provide a flat-rate quote upfront before any work starts, so you know the full cost before we pick up a tool. Call or book online for a service call with no obligation.
How do I know if I need a repair or a full faucet replacement?
In most cases, a repair is the right call. If the issue is a worn cartridge, failed O-rings, or a cracked valve seat, replacing that specific component is the fix. We recommend a full replacement when the faucet body itself is cracked, heavily corroded, or old enough that replacement cartridges are no longer available. We give you an honest recommendation either way before any work begins.
Do you offer same-day sink repair in Minneapolis?
Yes. Same-day sink repair is available for most calls in Minneapolis and the west metro suburbs, including St. Louis Park, Plymouth, Maple Grove, New Hope, and Golden Valley. Book online or call us and we will find the earliest available appointment.
Can I fix a dripping faucet myself?
Some homeowners can handle a basic cartridge swap if they have the correct replacement part number and a cartridge puller for stuck Moen or Delta cartridges. The most common issue with DIY faucet repairs is using the wrong part number, or not addressing underlying valve seat damage that caused the cartridge to wear out early. If a DIY attempt did not hold, we can diagnose what is actually going on.
What warranty do you provide on sink repairs?
Twin Cities Premier Plumbing warranties both parts and labor on sink repairs. If a problem comes back related to our work, we take care of it. Ask your technician about the specific warranty terms at the time of your repair.
What faucet brands do you work with?
We stock cartridges and common repair parts for Moen, Delta, and Kohler on every truck and work with all major residential faucet brands. Because we confirm your faucet brand ahead of time, the right part is almost always ready before we arrive.
Let's Get That Sink Fixed Today
Schedule your sink repair online or call for same-day service in Minneapolis and the west metro.